Shenzhen Yideyi Technology Limited Company 86-136-7006-7254
Outsourcing Electronics Medical Pcb Assembly Manufacturing IoT Gateway WIFI Smart

Outsourcing Electronics Medical Pcb Assembly Manufacturing IoT Gateway WIFI Smart

  • High Light

    6.5mm Outsourcing Electronics Manufacturing


    0.2oz Medical Electronics PCB Assembly


    0.2oz Medical PCB Assembly Solutions

  • Base Material
    FR-4, Rogers, Aluminum, CEM-1 OR FR-4, FR4/FR1/ FR2/ FR3/ CEM1/ CEM3/ROGERS/ARLON/ISOLA
  • Item
    Fast Turnkey IoT Gateway WIFI Smart Medical Industrial PCB Assembly Service
  • Drilling Bit Size
  • Electrical Testing
    Net List Test, Flying Probe
  • Surface Finishing
  • PCB Assembly Method
    SMT, Through-hole, Mixed, B
  • Application
    Electronics,and So On
  • Tolerance Of Impedence Control
  • Place of Origin
  • Brand Name
  • Certification
  • Model Number
  • Minimum Order Quantity
  • Price
  • Packaging Details
    PCB: Vacuum Packing / PCBA: ESD Packing
  • Delivery Time
    1-30 work days
  • Payment Terms
    L/C, D/A, D/P, T/T, Western Union, MoneyGram
  • Supply Ability

Outsourcing Electronics Medical Pcb Assembly Manufacturing IoT Gateway WIFI Smart

Power Bank Pcb Board PCB Assembly Service Circuit Board Assembly



YDY could provide one-stop pcb assembly service, including:


- Engineering Services

- PCB Design & Assembly

- Component Procurement & Material Management

- Fast Track Prototyping

- Cable and Wire Assemblies

- Plastics and Molds

-  PCBA Soldering

-  PCBA  reproduction

-  Schematic



PCB Assembly(SMT) Product Capacity


Turnkey PCBA PCB+components sourcing+assembly+package
Assembly details SMT and Thru-hole, ISO SMT and DIP lines
Lead Time Prototype: 15 work days. Mass order: 20~25 work days
Testing on products Flying Probe Test, X-ray Inspection, AOI Test, Functional test
Quantity Min quantity: 1pcs. Prototype, small order, mass order, all OK
Files needed PCB: Gerber files(CAM, PCB, PCBDOC)
Components: Bill of Materials(BOM list)
Assembly: Pick-N-Place file
PCB Panel Size Min size: 0.25*0.25 inches(6*6mm)
Max size: 20*20 inches(500*500mm)
PCB Solder Type Water Soluble Solder Paste, RoHS lead free
Components details Passive Down to 0201 size
Leadless Chip Carriers/CSP
Double-sided SMT Assembly
Fine Pitch to 0.8mils
BGA Repair and Reball
Part Removal and Replacement
Component package Cut Tape,Tube,Reels,Loose Parts
PCB assembly 
Drilling-----Exposure-----Plating-----Etaching & Stripping-----Punching-----Electrical Testing-----SMT-----Wave Soldering-----Assembling-----ICT-----Function Testing-----Temperature & Humidity Testing



The Printed Circuit Board Assembly (PCBA) Process


Transforming your design into the completed physical structure requires three steps: 1) fabrication, 2) component procurement and 3) assembly. Printed circuit board assembly or PCBA is one of the two PCB manufacturing processes. The other stage, fabrication, is performed first. During fabrication, your board design is constructed and prepared for assembly, where the components are securely attached to the board. Although PCBA may be comprised of ten or more steps, the process can be divided into the following major tasks:


Before placing surface mount technology (SMT) components, an initial layer of solder paste is applied to the board’s pads. This is done to promote good flow during soldering and minimize assembly defects. The application method may be manual or automated using a stencil or jet printing.


Component Placement
For SMT components, accurate placement of components on pads is crucial. Misalignment can lead to bad solder joints or tombstoning, where one side of the component is not attached to the board. Through-hole technology (THT) components are more flexible; however, it is usually advisable to have the component body as close to the board surface as possible.


The most common method for securing SMT components is reflow. For THT components, wave soldering is the preferred method. If both types of components are used, the SMT components are usually placed and soldered first. Only then are the THT components are placed and soldered, which extends the soldering task. Soldering is further extended for two-sided boards, as components are mounted on both the top and bottom surfaces. After the soldering step for each component type, the connections are inspected and if any issues are discovered, then rework is performed to correct them.


Cleaning is performed to remove any excess debris from the board’s surface(s). Alcohol or deionized water is effective at removing most contaminants.


Depanelization, which is the separation of the multi-board panel into individual units or PCBs, is the final major task and should not be overlooked. Inefficient panelization or panel design can result in significant waste and additional cost.

The above tasks are performed by your contract manufacturer (CM) and the quality of the manufacturing process depends on your selection of fabrication and assembly services. However, certain design tactics can be employed to optimize PCBA, especially for speed.


Outsourcing Electronics Medical Pcb Assembly Manufacturing IoT Gateway WIFI Smart 0


Shenzhen Yideyi Technology Co., Ltd. completes factory production system and strict quality requirements have helped hundreds of customers finished successful projects.

YDY has a dedicated team of professionals to guide you at every step - from sourcing to overcoming any potential challenges along the way.

The most important is the reliable material procurement channel would help you to minimize BOM costs.


Outsourcing Electronics Medical Pcb Assembly Manufacturing IoT Gateway WIFI Smart 1


With YDY many years of experience,we have built an excellent core team from PCB processing,compent procurement,SMT assembly and finished product testing.We try our best to serve every company.We will always
uphold our service,efficient and convenience.